$290.00
Australian-made Kingspan AIR-CELL Glareshield is a patented thermo reflective anti-glare insulation.
Kingspan AIR-CELL products are designed to combat heat gain and heat loss in all three forms (radiation, convection and conduction), resulting in thermal performance superior to many conventional insulations.
In addition, Kingspan AIR-CELL Glareshield is non-allergenic, non-irritant and has none of the health and safety warnings associated with using many conventional bulk insulations.
Assumption and Key
The R-values shown are Total R-values for the building element as required by the Energy Provisions of the Building Code of Australia. Kingspan AIR-CELL products are manufactured, tested and packaged in conformance with AS/NZS 4859.1.
The contribution of the product Total R-values depends on installation and environmental conditions. The R-value will be reduced in the event of the accumulation of dust on the upward facing surfaces and in those cavities that are ventilated.
General Requirements:
The instructions in this document are guidelines only and should be interpreted with consideration for the specific building design. The installation of Kingspan AIR-CELL should be in conformance with the applicable clauses from AS 3999 and AS/NZS 4200.2 unless otherwise specified.
Kingspan AIR-CELL can be damaged by intense heat above 105° C and contact with sparks and flame from blow torches, welders, cutting tools, etc. must be avoided.
The installer must make due provision for safety when installing Kingspan AIR-CELL in any application.
Emittance | Anti-glare: E0.05 |
Reflective | E0.03 |
Reflectance | Anti-glare: 95% |
Reflective | 97% |
Roll Size | 1350 mm x 22.25 m (30 m2) |
Roll Diameter | 440 mm |
Product Thickness | 7 mm |
Roll Weight | 11 kg |
Duty | Extra Heavy |
Max Span | 2.4m without support mesh |
Standard | Management System |
---|---|
ISO 9001:2008 | Quality Management |
ISO 14001:2004 | Environmental Management |
Test | Standard |
---|---|
Product Code | WA004 |
Product Thickness | 7 mm |
Bubble Diameter | 20 mm |
Foil Thickness | 6.5 microns |
Foil Purity | 99.45% |
Reflectance | Reflective: 97% Anti-glare: 95% |
Emittance | Reflective: E0.03 Anti-glare: E0.05 |
Roll Size | 1350 mm x 22.25 m (30 m2) |
Roll Diameter | 440 mm |
Weight | 11 kg |
Pliability | No cracking |
Fungi Growth Ability | Nil |
Shrinkage | ≤ 0.5% |
Duty (BR) | Extra Heavy |
Edge Tear Resistance | Lateral 551N, Machine 514N |
Material Thermal Resistance | R0.14 |
Test | Standard | Result |
---|---|---|
Corrosion Resistance | AS/NZS 4859.1 Appendix 1 | Pass |
Flammability | AS 1530.2 | Low (Index ≤ 5) |
Ignitability Flame Spread Heat Release Smoke Release |
AS 1530.3 | 0 / 0 / 0 / 0- 1 |
Thermal Resistance | ASTMC518 | R0.14 |
Emittance | ASTM-E408 | Reflective: E0.03 Anti-glare: E0.05 |
Vapour Transmission | ASTM-E96 | Medium |
Dry Delamination | AS/NSZ 4201.1 | Pass |
Wet Delamination | AS/NSZ 4201.2 | Pass |
Shrinkage | AS/NSZ 4201.3 | ≤ 0.5% |
Water Penetration | AS/NSZ 4201.4 | High Resistance |
Water Absorbency | AS/NSZ 4201.6 | Unclassified |
Edge Tear | AS 4200.1 6.1. | Lateral: 551N Machine: 514N |
Duty | AS 4200.1 | Extra Heavy |
Burst Force | AS 3706.4 | 1 kN |
Impact Resistance | AS/NZS 4040.4 (Modified) | Pass |
Acoustics | Bassett Acoustics Report MA0221j02 | 6 db (A) noise reduction |
Recyclability | Waste not recyclable. Roll width to suit most applications to minimise site waste |
Re-usability | Re-usable if removed with care (long term of service expected) |
Water Use | No water used in Kingspan Insulation's manufacturing process |
Ozone Depleting Substances | None present in the finish product or in Kingspan Insulation's manufacturing process |
Packaging | Contains approximately 10% recycled product. Packaging is 100% recyclable |
Embodied Energy | 47 MJ/m² approximately |